The making off - prototype 1

Check out this video below on how to hack a Rollei S-50 Wifi actioncam. We have soldered two wires to the shutter release and then drilled holes through the casing to connect a waterproof cable. The holes and connectors were sealed up with epoxy resin. The trigger was made of a piece of copper tin with two super magnets glued onto it, and which was framed on either side by two reed contacts embedded in epoxy resin. By pulling the piece of tin towards either reed switch, the camera fires. To the eye on top of the tin, a bait can be attached with fishing line. Hand made in Germany, thanks to my "Chief engineer" Dietmar :)